Panel Size: 0.7 inches diagonal (4:3 aspect ratio)

Display Method: DLP chip x 1, DLP system

Pixels: 786,432 (1,024 x 768) pixels

Lamp: 300 W (max. 310 W) UHM lamp x 2

Brightness: 8,000 lm (dual-lamp, lamp mode: high)

Contrast Ratio: 2,000:1Resolution: 1,024 x 768 pixels

Lens: Powered zoom (throw ratio 1.8-2.5:1), powered focus F 1.7-1.9, f 25.6-35.7 mm

Screen Size: 50- 600 inches (50-200 inches with the ET-DLE055), 4:3 aspect ratio

Optical Axis Shift: Vertical: +50% from center of screen (powered), horizontal: +10%/-10% from center of screen (powered)

Scanning Frequency - DVI-D: fH: 15-91 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower

Scanning frequency - RGB: fH: 15-91 kHz, fV: 50-85 Hz, dot clock: 150 MHz or lower

Scanning frequency - YPBPR (YCBCR): 1080/50p: fH: 56.25 kHz, fV: 50 Hz

S-Video/Video: fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

DVI-D in: Compatible with non-interlaced signals only, dot clock: 25-162 MHz

RGB 1 IN: BNC x 5RGB 2 IN: D-Sub HD 15-pin (female)

VIDEO In: BNC x 1 (composite video)

S-VIDEO In: Mini DIN 4-pin x 1 (S-Video)

SERIAL IN: D-sub 9-pin (female) x 1 (for external control, RS-232C compliant)

REMOTE 1 IN: M3 jack x 1 (for wired remote control)

REMOTE 1 OUT: M3 x 1 for link control (for wired remote control)

REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel)

LAN: RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink)

Keystone correction range: Vertical: +40/-40 degrees

Installation: Ceiling/floor, front/rear

Power Supply: 120 V AC, 7.5 A, 50/60 Hz

Power Consumption: (0.2 W at 120 V AC when standby mode set to eco, 8 W at 120 V AC when standby mode set to normal. Both with fan stopped.)

Dimensions (WxHxD): 19-19/32" x 6-7/8" x 18-11/32

Weight: Approximately 35.9 lbs

Operating Temperature*6: 0 degrees C-45 degrees C (32 degrees F-113 degrees F)

Operating humidity: 20%-80% (no condensation)

Supplied accessories: Power cord, power cord secure lock, wireless remote control unit, batteries (R6/AA type x 2)